Outgoing Groups; Outgoing Groups Programming When T1 Is Programmed; Outgoing Groups When Pri Is Programmed; Lcr Codes - Inter-Tel 3000 Administration Manual

OUTGOING GROUPS

Outgoing groups programming when T1 is programmed

Individual T1 channels can be programmed into the different line groups.
•
From the Programming extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until "System Programming" is displayed.
•
Select "System Programming".
•
Enter the System Programming Password and select "Lines".
•
Press the Scroll Down key ( ) until "Outgoing Groups" is displayed.
•
Select "Outgoing Groups" option.
•
Select the group you wish to set up. Up to 11 groups can be set up, each with a corresponding access
code, 9 or 760 - 769.
•
Select the lines to be in the group.
•
The menu updates to show all T1 and the back up CO lines equipped. The lines in the group are
indicated by a "♦".
•
Select the lines that are in the selected group. Lines 1-24 are the T1 lines programmed as equipped in
the Equipped Lines Programming and Lines 25-28 are the CO lines.
In default all lines, T1 and backup are in group 1 selected by dialing 9.

Outgoing Groups when PRI is programmed

In this case all available B-Channels must be programmed into the same line group.
•
From the Programming extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until "System Programming" is displayed.
•
Select "System Programming".
•
Enter the System Programming Password and select "Lines".
•
Press the Scroll Down key ( ) until "Outgoing Groups" is displayed.
•
Select "Outgoing Groups" option.
•
Select the group you wish to set up. Up to 11 groups can be set up, each with a corresponding access
code, 9 or 760 - 769.
•
Select either the 'PRI' or the back up CO lines (Line 24 - Line 27).
•
If PRI is selected all the available B-channels are placed in the selected group.
In default the PRI and CO Lines are all in Group 1, selected by dialing 9.

LCR CODES

Selecting Lines when T1 is programmed

When the option to select lines is presented the menu is updated to show all the equipped lines.
•
From the programming extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until "System Programming" is displayed.
•
Select "System Programming".
•
Enter the System Programming Password and select "Lines".
•
Scroll Down and select "LCR Codes".
•
Select "LCR On" to activate the feature.
•
Enter in a code index (01-50).
•
Enter an input code (Up to 5 digits). Press "Confirm". This is the code dialed by the user.
•
Enter an output code (Up to 9 digits). This is the code that will be inserted before the telephone number
that the user dials. This code can be used to select a specific telephone company.
•
Select the preferred or exclusive option.
•
If "Exclusive" is selected, the calls can only be sent on the lines selected.
112
Inter-Tel 3000
Administrator's Manual