Motorola RFS Series System Reference Manual page 356

6-2 Motorola RF Switch System Reference Guide
To view main menu security information:
1. Select Security
2. Refer to the following information to discern if configuration changes are warranted:
Access Port Intrusion
Detection
Wireless IDS/ IPS
Wireless Filters
Certificates
Trustpoints
Key Pairs
The Apply and Revert
from the main menu tree.
Displays the Enabled or Disabled state of the switch to detect potentially hostile
Access Ports (the definition of which defined by you). Once detected, these
devices can be added to a list of devices either approved or denied from
interoperating within the switch managed network. For more information, see
Access Point Detection on page
Displays the state of the switch protecting against threats from MUs trying to find
network vulnerabilities. For more information, see
Protection on page 6-10.
Displays the state of the filters used to either allow or deny a MAC address (or
groups of MAC addresses) from associating with the switch. For more information,
see Configuring Firewalls and Access Control Lists on page
Displays the number of Server and CA certificates currently used by the switch.
For more information, see
Displays the number of trustpoints currently in use by this switch. The trustpoint
signing the certificate can be a certificate authority, corporation or an individual.
A trustpoint represents a CA/identity pair and contains the identity of the CA, CA-
specific configuration parameters, and an association with one enrolled identity
certificate. For more information, see
Using Trustpoints to Configure Certificates on page
Displays the number of Key Pairs currently used by the switch. For more
information, see Configuring Trustpoint Associated Keys on page
buttons are greyed out within this screen, as there is no data to be configured or saved.
6-3.
Wireless Intrusion Detection /
Creating Server Certificates on page
6-109.
6-14.
6-108.
6-117.