cluster cfg
image
expected image version
Once again, for DHCP option based auto install the URLs is ignored and those passed by DHCP are not stored.
Whenever a string is blank it is shown as --not-set--.
2.4 AP-4131 Access Point to Access Port Conversion
SWITCH NOTE: AP-4131 Access Point to Access Port Conversion is only available on the
RFS6000 platform.
To convert an AP-4131 "fat" Access Point to a "thin" AP-4131 Access Port you need to load the port
conversion version firmware. Refer to the files available with you Motorola Web site download package.
To convert an AP-4131 Access Point
1. Verify a TFTP server is up and running and the firmware you are going to install is in the root directory of
the TFTP server.
2. Log in to the AP-4131 as Admin. The default password is Motorola.
3. Select the
AP Installation
4. From the
IP Address
If the IP address was changed, you will need to reset the AP for the change to be implemented.
yes
ftp://ftp:ftp@192.9.200.1/RFSwitch/cluster-config
yes
ftp://ftp:ftp@147.11.1.11/RFSwitch/images/RFS6000.img
4.3.0.0
main menu item.
field, enter a new IP address (if required) and select
Switch Web UI Access and Image Upgrades
-XXXXX
Save-[F1]
to save the change.