Motorola RFS Series System Reference Manual page 340

5-58 Motorola RF Switch System Reference
3. Select an existing profile and click the
address and SNMP version. Motorola recommends editing a profile only if some of its attributes are still
valid, if the profile is obsolete, delete it and create a new one.
4. Select an existing profile and click the
profiles.
5. Click the Add
information, see
6. Click the Start Discovery
Authentication
compromise switch security. Therefore, when Start Discovery is selected, the switch prompts the user to
verify their SNMP credentials against the SNMP credentials of discovered devices. SNMP v2 and v3
credentials must be verified before the switch displays discovered devices within the Recently Found
Devices table.
If SNMP v2 is used with a discovering profile, a
Community String entered is required to match the name used by the remote network management
software of the discovered switch.
If SNMP v3 is used with a discovering profile, a
Password are required to match the name used by the remote network management software of the
discovered switch.
When the credentials of the V2 Read Community or V3 Authentication screens are satisfied, the switch
discovery process begins.
7. If necessary, click the
discovery operation.
Edit
Delete
button to display a screen used to define a new switch discovery profile. For more
Adding a New Discovery Profile on page
button to display a
(SNMP v3) screen.
Stop Discovery button (enabled only during the discovery operation) to stop the
button to modify the profile name starting and ending IP
button to remove this profile from the list of available
5-59.
Read Community String
Read Community String
V3 Authentication screen displays. The User Name and
(SNMP v2) or V3
screen displays.The