Motorola RFS Series System Reference Manual page 226

4-124 Motorola RF Switch System Reference Guide
Radio Type
AP Location
5. The Radio Rescuer Settings
information:
Available Radios
Rescuer Radios
Add
Remove
Rescuer MAC
AP Name
AP Location
Rescuer Power
Rescuer Attenuation
6. The Advanced Properties
Antenna Gain
Coverage Rate
Lock Detector
Lock TX Power
Lock Channel
Lock Rescuer
7. Click OK to use the changes to the running configuration and close the dialog.
8. Click Cancel
4.7.9.5 Viewing Smart RF History
To view Smart RF history:
Displays the radio type of the corresponding APs.
Available types are:
• 802.11a
• 802.11an
• 802.11b
• 802.11bg
• 802.11bgn
Displays the current location for the selected AP. The location can be configured
on the Access Port Radios Configuration page.
section allows you to configure the following radio rescuer settings and
Displays a list of radios available to be used as rescuer radios.
Displays a list of radios that have been configured as Rescuer Radios.
Click the Add button to add a selected radio or radios from the Available Radios
list into the Rescuer Radios list.
Click the Remove button to remove a selected radio or radios from the Rescuer
Radios list.
Displays the Media Access Control (MAC) Address of the selected Rescuer Radio.
Displays the configured AP Name for the selected Rescuer Radio.
Displays the configured AP Location for the selected Rescuer Radio.The location
can be configured on the Access Port Radios Configuration page.
Displays the current power level of the selected Rescuer Radio.
Displays the current Attenuation power for the selected Rescuer Radio.
section contains the following configurable items:
Specify the desired antenna gain in dBi for the selected radio.
Specify the desired coverage rate for the selected radio from the pull-down menu
options.
Enable or disable radio detector mode lock for the selected radio.
Check this box to lock the TX power for the selected radio.
Check this box to lock the channel for the selected radio.
Check this box to lock the rescuer radio for the selected radio.
to close the dialog without committing updates to the running configuration.