Motorola RFS Series System Reference Manual page 438

6-84 Motorola RF Switch System Reference Guide
2. Click the Crypto Maps
3. Review the following Crypto Map attributes to determine if an existing Crypto Map requires revision,
deletion or if a new Crypto Map needs to be created.
Priority / Seq
Name
Mode Config
Number of Peers
SA Lifetime (secs)
SA Lifetime (Kb)
ACL ID
Number of Interfaces Displays the number of interfaces each specific Crypto Map is used with.
4. Select an existing Crypto Map and click the Edit button to modify the Crypto Map's attributes.
If an entire Crypto Map requires revision, consider deleting the Crypto Map and creating a new one using
the Add function.
Refer to the definitions supplied for the
requirements for editing a Crypto Map.
5. Select an existing Crypto Map and click the
tab and select Crypto Map
Displays the numerical priority assigned to each Crypto Map.
Displays the user-assigned name for this specific Crypto Map. This name can be
modified using the Edit function or a new Crypto Map can be created by clicking
the Add button.
Displays a green checkmark for the Crypto Map used with the current interface. A
"X" is displayed next to other Crypto Maps not currently being used.
Displays the number of peers used by each Crypto Map displayed.
Displays a SA Lifetime (in seconds) that forces the periodical expiration and re-
negotiation of peer credentials. Thus, continually validating the peer relationship.
Causes the security association to time out after the specified amount of traffic (in
kilobytes) has passed through the IPSec tunnel (using the security association).
Displays the name of the ACL ID used for each Crypto Map.
Add Crypto Map
Delete
Entries.
screen (on the next page) to ascertain the
button to remove it from the list of available.