Message Parameters; Configuring Snmp Traps - Motorola RFS Series System Reference Manual

7-10 Motorola RF Switch System Reference Guide

7.3.4 Message Parameters

To view Message Parameters:
1. Select Management Access
2. Select the Message Parameters
3. Refer to the following parameters displayed with in Message Parameters screen.
Retries
Timeout
Rows per Request
4. The Apply and
saved.
5. Highlight an existing message parameter and edit the value. Click the
made.
6. Highlight an existing message parameter and click the

7.4 Configuring SNMP Traps

Use the SNMP Trap Configuration screen to enable or disable individual traps or by functional trap groups.
It is also used for modifying the existing threshold conditions values for individual trap descriptions. Refer to
the tabs within the SNMP Trap Configuration screen to conduct the following configuration activities:
• Enabling Trap Configuration
• Configuring Trap Thresholds
> SNMP Access
tab from within the SNMP Access screen.
Displays the number of retries permitted
Displays the timeout in seconds
Displays the number of rows per request
Revert buttons are greyed out within this screen, as there is no data to be configured or
from the main menu tree.
Apply
Revert button to remove the changes made.
button to save the changes