Motorola RFS Series System Reference Manual page 192

4-90 Motorola RF Switch System Reference Guide
2. Click the Voice Statistics
The Voice Statistics table displays the following information:
Call Index
MAC Address
Voice Protocol
Media Protocol
Call State
Call Codec
R Factor
tab.
Displays the numerical identifier assigned to each Access Port.
Displays MAC Address
Displays which voice protocol is being used for the selected call. Voice protocols
include:
• SIP
• TPSEC
• Spectralink
• H.323
The Media Transport Protocol used in the call (mostly RTP).
Displays the call state for the Voice Call. Call state can be one of:
• Initiated
• Accepted
• Established
Terminated calls are not displayed.
Displays the codec in use for the active calls.
Displays the average call quality using the R Factor scale. The R Factor method
rates voice quality on a scale of 0 to 120 with a higher score being better. If the R
Factor score is lower than 70 it is likely that users will not be satisfied with the
voice quality of calls.