Viewing The Ports Runtime Status - Motorola RFS Series System Reference Manual

3-16 Motorola RF Switch System Reference
Name
Speed
Duplex
Channel Group
Description
Admin Status
Medium
Read-only details about the port's cabling connection also display within the
information should be used to determine the configuration defined for this port.
5. Click the OK
6. Click Cancel

3.2.2 Viewing the Ports Runtime Status

The Runtime tab displays read-only runtime configuration for uplink and downlink ports.
To view the runtime configuration details of the uplink and downlink ports:
1. Select Switch
Displays the read-only name assigned to the port.
Select the speed at which the port can receive and transmit the data. Select from
the following range:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
• Auto
Modify the duplex status by selecting one of the following options:
• Half
• Full
• Auto
Optionally, set the Channel Group
individual Ethernet links (over the selected channel) into a single logical link that
provides bandwidth between the switch and another switch or host. The port
speed used is dependant on the Duplex value selected (full, half, or auto). If a
segment within a channel fails, traffic previously carried over the failed link is
routed to the remaining segments within the channel. A trap is sent upon a failure
identifying the switch, channel, and failed link.
Enter a brief description for the port. The description should reflect the port's
intended function to differentiate it from others with similar configurations.
Either Enable (activate) or Disable (shutdown) the admin status of the port.
Displays the current (read-only) connection medium used by this port.
button to commit the changes made to the port configurations.
to disregard any changes and revert back to the last saved configuration.
> Ports from the main menu tree.
defined for the port. The switch bundles
Edit screen. This