4.12.1.4 Configuring a RADIUS Server
1. Select
Network
opens up. The
2. Refer to the
Radius
RADIUS Server
Address
RADIUS Port
RADIUS Shared
Secret
Server Timeout
>
Wired Hotspot
>
Edit
Radius Configuration
screen contains tabs for defining the Radius server settings.
field and define the following credentials for a primary and secondary Radius server.
Enter the IP address of the primary and secondary servers acting as the Radius
user authentication data source.
Enter the TCP/IP port number for the primary and secondary servers acting as the
Radius user authentication data source. The default port is 1812.
Provide a shared secret (password) for user credential authentication with the
primary or secondary Radius server.
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
server.
>
Radius
Configuration. The
4-179
Network Setup
Radius Configuration
screen