Motorola RFS Series System Reference Manual page 273

2. Select the Configuration
The Configuration
Vlan Index
Enable
Vlan Index
Primary RADIUS Server IP/
Port
Secondary RADIUS Server
IP/Port
Edit
Delete
4.12.1.1 Configuring an Internal Hotspot
Using the Internal
pages are pre-created to collect login credentials through Login.htm, to send them to a RADUIS server, and
display a Welcome.htm or a Faliure.htm depending on the result of the authentication attempt.The terms of
usage for the hotspot is also configurable using the Terms html page.
NOTE: When using an internal hotspot, ensure that traffic can pass on TCP port 444
between the switch's internal Web server and the hotspot clients.
To create a hotspot maintained by the switch's own internal resources:
tab.
tab displays the following information:
Enter a Vlan index between 1 and 4094.
Click the Enable button to enable a hotspot.
The Vlan index on which the hotspot is enabled.
This is the IP address of the Primary RADIUS server and the port on which the
Primary RADIUS server is listening.
This is the IP address of the Secondary RADIUS server and the port on which the
Secondary RADIUS Server is listening.
Click the Edit button to configure the internal and the external hotspots as well as
to configure the RADIUS Server.
Click the Delete button to delete an enabled hotspot entry.
option means the user develops the hotspot using the internal Web server. The HTML
4-171
Network Setup