Motorola RFS Series System Reference Manual page 70

3-14 Motorola RF Switch System Reference
2. Select the Configuration
Name
Aggregation
Membership
(RFS7000, RFS4000)
MAC Address
Admin Status
Speed
Duplex
Medium Type
SWITCH NOTE: On a RFS7000, the MAC address for the me1 port changes when the
switch firmware is updated to the 1.3 version. This addresses an issue where the switch
MAC address and ge1 interface shared the same MAC address in previous versions.
3. Select a port and click the
Editing the Port
3.2.1.1 Editing the Port Configuration
To modify the port configuration:
tab to display the following read-only information:
Displays the current port name. The port names available vary by switch.
RFS6000: ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1, wan
RFS7000: ge1, ge2, ge3, ge4, me1
RFS4000: ge1, ge2, ge3, ge4, ge5. up1
The Aggregation Membership value displays the channel group the port is a
member of.
Displays the port's MAC Address. This value is read-only, set at the factory and
cannot be modified.
Displays whether the port is currently Up or Down.
Displays the current speed of the data transmitted and received over the port.
Displays the port as either half or full duplex.
The Medium Type value displays the physical connection type of the port. Medium
types are:
• Copper: Used on RJ-45 Ethernet Ports
• Optical: Used on Fiber Optic Gigabit Ethernet Ports
Edit button to modify the port configuration. For additional information, see
Configuration.