3. Click the
Add
4. Enter a value between 1 and 15 as the Instance ID.
5. Click
OK
to save and commit the changes.
6. The
Bridge Instance
7. Click
Cancel
4.10.2.2 Associating VLANs to a Bridge Instance
1. Select
Network
2. Select the
Bridge Instance
3. Select an ID from the table within the
4. Enter a VLAN ID between 1 to 4094 in the
index. You can add multiple VLANs to an instance.
5. Click
OK
to save and commit the new configuration.
6. Click
Cancel
4.10.3 Configuring a Port
Use the
Port
tab to view and configure MSTP port parameters, including enabling/disabling the spanning
tree algorithm on one or more ports (displaying the designated bridge and port/root information).
To view and configure MSTP port details:
1. Select
Network
button.
tab will now display the new instance ID.
to disregard the new Bridge Instance ID.
>
Multiple Spanning Tree
tab.
Bridge Instance
to disregard the changes.
>
Multiple Spanning Tree
from the main menu tree.
tab and click the
VLAN ID
field. This VLAN ID is associated with the
from the main menu tree.
4-161
Network Setup
Add
VLANs button.
Instance