Motorola RFS Series System Reference Manual page 396

6-42 Motorola RF Switch System Reference Guide
MU Deauthenticate
DHCP Trust
ARP Trust
ARP Rate
5. If the properties of an existing WLAN firewall setting fulfill to your needs but still require modification to
better filter traffic, select the WLAN and click the
6. If an existing WLAN firewall rule is now obsolete, select it from those listed and click the
7. Click the Add
Firewall Rule on page
6.4.13.1 Adding a new WLAN Firewall Rule
To add new WLAN firewall rules:
1. Select Security
2. Click the Configuration
3. Click the WLAN
4. Click the Add
Displays whether or not mobile unit de-authentication is enabled for each WLAN.
If MU Deauthenticate
thresholds configured for Allowed MU denies per second will be deauthenticated.
If MU Deauthenticate
is disabled a red "X" will be displayed.
Displays the DHCP trust status for the selected WLAN. These DHCP packets are
used to update the DHCP Snoop Table to prevent IP spoof attacks. Any DHCP
packets from a DHCP server connected to the selected WLAN is considered
trusted. By default all WLANs are not DHCP trusted. When DHCP trust is enabled,
a green checkmark is displayed. when disabled, a red 'X' is displayed.
Displays the ARP trust status for the selected WLAN. Trusted ARP packets are also
used to update the DHCP Snoop Table to prevent IP spoof and arp-cache-poisoning
attacks. By default, none of the WLANs are ARP trusted.
Displays the Address Resolution Protocol (ARP) rate threshold. The ARP threshold
determines the number of ARP packets permissible per second. Rates can be
between 0 and 1000000
button to create a new WLAN firewall rule. For more information, see
6-42.
> Wireless Firewall from the main tree menu.
tab.
tab.
button.
is enabled any associated mobile unit which hit the
is enabled a green checkmark will be displayed. When it
Edit button.
Delete button.
Adding a new WLAN