Motorola RFS Series System Reference Manual page 196

4-94 Motorola RF Switch System Reference Guide
11.When using clustering and the Cluster GUI feature is enabled, a pull-down menu will be available to
select which cluster members' Access Port radios are displayed. To view Access Port radios from all
cluster members, select All from the pull-down menu. To view Access Port radios from a specific cluster
member, select that member's IP address from the pull-down menu.
12.Click the Global Settings
For more information, see
4.7.1.1 Configuring an AP Mesh Network
Use the AP Mesh
To configure AP Mesh:
1. Select Network
2. Click the Configuration
3. Click the AP Mesh
AP.
4. To use the AP as a Base Bridge, check the
information:
Maximum Number of
Client Bridges
button to display a screen with settings applying to all radios on the system.
Configuring an AP's Global Settings on page
screen to configure mesh network settings for the selected Access Point.
> Access Port Radios from the main menu tree.
tab.
button to display a screen containing AP Mesh settings, which apply to the selected
When a radio has been configured as a Base Bridge, specify the maximum number
of client bridges that can connect to the Base Bridge.
Base Bridge checkbox and configure the following
4-95.