Wireless Switching - Motorola RFS Series System Reference Manual

1-8 Motorola RF Switch Systen Reference
To contact Motorola Support in the event of a password reset requirement, go to
Business/US-EN/Support
CAUTION: Only a qualified installation professional should set or restore the access
point's radio and power management configuration in the event of a password reset.

1.2.2 Wireless Switching

The switch supports the following wireless switching features:
• Adaptive AP
• Physical Layer Features
• Rate Limiting
• Proxy-ARP
• HotSpot / IP Redirect
• IDM (Identity Driven Management)
• Voice Prioritization
• Self Healing
• Wireless Capacity
• AP and MU Load Balancing
• Wireless Roaming
• Power Save Polling
• QoS
• Wireless Layer 2 Switching
• Automatic Channel Selection
• WMM-Unscheduled APSD
• Multiple VLANs per WLAN
1.2.2.1 Adaptive AP
An adaptive AP (AAP) is an AP-5131 or AP-7131 Access Point adopted by a wireless switch. The management
of an AAP is conducted by the switch, once the Access Point connects to the switch and receives its AAP
configuration.
An AAP provides:
• local 802.11 traffic termination
• local encryption/decryption
• local traffic bridging
• tunneling of centralized traffic to the wireless switch
The connection between the AAP and the switch can be secured using IPSec depending on whether a secure
WAN link from a remote site to the central site already exists.
The switch can be discovered using one of the following mechanisms:
http://www.motorola.com/