Motorola RFS Series System Reference Manual page 491

7.4.1.1 Configuring E-mail Notifications
To enable e-mail notification:
1. Select Management Access
2. Click the Email Configuration
servers and addresses for alerts.
3. Check the Enable SMTP
notification on the switch, this box must be checked.
Configure the SMTP mail server properties as follows:
Name
Port
User Name
Password
Enable Authentication Check the Enable Authentication box to enable support for SMTP Authentication
> SNMP Trap Configuration
button to launch a dialogue where you can configure outgoing E-mail
box to enable the outgoing mail server on the switch. In order to use E-mail
Enter the hostname of your outgoing SMTP mail server. This is the server that is
used to deliver outgoing mail.
Specify the port number used by your outgoing SMTP server. In many cases this is
port 25.
Enter the username for the user which will be sending outgoing mail through the
SMTP server.
Enter the password associated with the above username.
which is required for certain outgoing SMTP servers.
Switch Management
from the main menu tree.
7-13