Motorola RFS Series System Reference Manual page 406

6-52 Motorola RF Switch System Reference Guide
2. Click the Statistics
3. From the Statistics
4. Refer to the following information as displayed within the
Interface
Action
Protocol
Low Source IP
High Source IP
Low Destination IP
High Destination IP
Packets In
Packets Out
tab.
section select the Statistics
Interface displays the physical/virtual interfaces used to add the ACL association
to the switch.
Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority.
Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority or "type of service."
Displays the Low Source IP Address from where the packets are sourced.
Displays the High Source (highest address in available range) IP Address from
where the packets are sourced.
Displays the Low Destination (lowest address in available range) IP Address.
Displays the High Destination IP Address.
Displays the number of packets (in bytes) transmitted over the ACL.
Displays the number of instances this ACL has been used. Periodically review to
determine whether specific ACLs should be deleted or modified to make relevant.
tab.
Statistics tab: