Redundancy Group License Aggregation Rules - Motorola RFS Series System Reference Manual

5-44 Motorola RF Switch System Reference
Rogue APs
Self Healing Radios
5. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
6. Click Close
5.4.3.2 Adding a Redundancy Group Member
Use the Add screen as the means to add a new member (by adding their IP address) to an existing
redundancy group (cluster).
To add a new member to a redundancy group:
1. Select Services
The Redundancy
2. Select the Member
3. Select the Add
4. Enter the IP Address of a new member.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
7. Click Cancel

5.4.4 Redundancy Group License Aggregation Rules

The following are rules governing license usage amongst members of a redundancy group:
• A redundancy group license is determined by adding individual switch licenses.
• Do not allow different port speed/duplex settings on members. Each members should have the settings.
Displays the number of Rogue APs detected by each member. Use this information
to discern whether these radios represent legitimate threats to other members of
the redundancy group.
Displays the number of self healing radios on each detected member. These radios
can be invaluable if other radios within the redundancy group were to experience
problems requiring healing by another radio.
Status field.
to close the dialog without committing updates to the running configuration.
> Redundancy from the main menu tree.
screen displays with the
tab.
button.
Status field.
to close the dialog without committing updates to the running configuration.
Configuration tab selected.