Supplementary Services - AudioCodes MP-124 User Manual

Parameter
Out-Of-Service Behavior
[FXSOOSBehavior]
5.5.2.2
SIP User's Manual
http://ArtTel.ru
Table 5-12: General Parameters (Advanced Parameters)
Determines the behavior of FXS endpoints that are not defined (in the
Endpoint Phone Number table), and the behavior of all FXS endpoints
when a Busy-Out condition exists.
[0] None = Normal operation. No response is provided to undefined
endpoints. Dial tone is played to FXS endpoints when a Busy-Out
condition exists.
[1] Reorder Tone = The gateway plays a reorder tone to the
connected phone/PBX (default).
[2] Polarity Reversal = The gateway reverses the polarity of the
endpoint, marking it unusable (relevant, for example, to PBX DID
lines). This option can't be configured on-the-fly.
[3] Reorder Tone + Polarity Reversal = Same as 2 and 3 combined.
This option can't be configured on-the-fly.
[4] Current Disconnect = Thegateway disconnects the current of the
FXS endpoint. This option can't be configured on-the-fly.

Supplementary Services

The Supplementary Services option is used to configure parameters that are associated
with supplementary services. For detailed information on supplementary services, refer to
'Working with Supplementary Services' on page 356.
Description
108
MediaPack Series
Document #: LTRT-65409