SIP User's Manual
5.13.2.4 Viewing Ethernet Port Information
5.13.2.5 Viewing the Active Alarms Table
Version 5.2
http://ArtTel.ru
From the shortcut menu, choose Update Port Info; a text box appears.
3.
Figure 5-85: Assigning a Port Name
Type a brief description for the port, and then click Apply Port Info.
4.
The 'Ethernet Port Information' screen provides read-only information on the Ethernet
connection used by the MP-11x. Accessing this screen from the Home page provides an
alternative to accessing it from the Status & Diagnostics menu (refer to 'Viewing Ethernet
Port Information' on page 225).
To view Ethernet port settings, take this step:
In the Home page, click the Uplink LED; the 'Ethernet Port Information' screen opens.
Figure 5-86: Ethernet Port Information Screen
The Home page allows you to view the list of active alarms. These alarms are displayed in
the 'Active Alarms' screen.
For each alarm, the following is displayed:
Severity: severity level of the alarm:
•
Critical: red
•
Major: orange
•
Minor: yellow
•
No alarm: green
Source: unit from which the alarm was raised
Description: brief explanation of the alarm
Date: date and time that the alarm was generated
249
5. Web-based Management
September 2007