Ip Profile Settings - AudioCodes MP-124 User Manual

5.5.5.3
SIP User's Manual
http://ArtTel.ru
From the 'Profile Preference' drop-down list, select the preference (1-20) of the current
4.
Profile. The preference option is used to determine the priority of the Profile. Where
'20' is the highest preference value. If both IP and Tel profiles apply to the same call,
the coders and other common parameters (noted by an asterisk in the description of
the parameter TelProfile) of the preferred Profile are applied to that call. If the
Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used). The order of the coders is determined by the
preference.
Configure the Profile's parameters according to your requirements. For detailed
5.
information on each parameter, refer to the description of the screen in which it is
configured as an individual parameter.
From the 'Coder Group' drop-down list, select the coder group to which you want to
6.
assign the Profile. You can select the gateway's default coders (refer to 'Coders' on
page 92) or one of the coder groups you defined in the 'Coder Group Settings' screen
(refer to 'Coder Group Settings' on page 138).
Repeat steps 2 to 6 for the second to fifth Tel Profiles (optional).
7.
Click the Submit button to save your changes.
8.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
9.

IP Profile Settings

The IP Profile Settings option is used to define up to four different IP Profiles. These
Profiles are used in the 'Tel to IP Routing' and 'IP to Trunk Group Routing Table' screens
for associating IP Profiles to routing rules. IP Profiles can also be used when working with
Proxy server (set AlwaysUseRouteTable to 1).
You can also configure the IP Profiles using the ini file parameter IPProfile (refer to 'SIP
Configuration Parameters' on page 279).
142
MediaPack Series
Document #: LTRT-65409