SIP User's Manual
5.13.2 MP-124
5.13.2.1 Accessing the Home Page
Area
Channel /
Ports
LAN
ALARMS
Version 5.2
http://ArtTel.ru
The Home page displays a graphical display of the LEDs of the MP-124 front panel. In
addition, it also shows general information (such as the gateway's IP address) in the
General Information pane.
To access the Home page, take this step:
Open the Home page by clicking the Home icon
Figure 5-82: Gateway's Home Page
The table below describes the areas of the graphic display of the MP-124.
Table 5-56: Description of the Areas of the Home Page
Displays the current status of the channels indicated by its color:
(Red): line not connected (only applicable to FXO gateways)
(Grey): channel inactive
(Blue): handset is offhook
(Green): active RTP stream
You can also view the channel's port settings (refer to 'Viewing Port Information' on
page 248) and assign a name to the port (refer to 'Assigning a Name to a Port' on
page 248).
If clicked, the 'Ethernet Port Information' screen opens displaying Ethernet port
configuration settings (refer to 'Viewing Ethernet Port Information' on page 249).
This area is used for viewing the Active Alarms table. For a detailed description, refer
to 'Viewing the Active Alarms Table' on page 249.
; the Home page is displayed.
Description
247
5. Web-based Management
September 2007