Media Settings; Configuring The Voice Settings - AudioCodes MP-124 User Manual

5.7
5.7.1
SIP User's Manual
http://ArtTel.ru

Media Settings

The Media Settings submenu is used to configure the gateway's channel parameters.
These parameters are applied to all the gateway's channels.
From the Media Settings submenu, you can define the following:
Voice Settings (refer to 'Configuring the Voice Settings' on page 176)
Fax / Modem / CID Settings (refer to 'Configuring the Fax / Modem / CID Settings' on
page 179)
RTP/RTCP Settings (refer to 'Configuring the RTP / RTCP Settings' on page 183)
Hook-Flash Settings (refer to 'Configuring the Hook-Flash Settings' on page 186)
General Media Settings (refer to 'Configuring the General Media Settings' on page
187)
Notes:
•
Parameters contained within square brackets are the names used to
configure the parameters via the ini file.
•
Channel parameters are changeable on-the-fly. Changes take effect from
next call.
•
Several Channels Settings parameters can be configured per call using
profiles (refer to 'Configuring the Profile Definitions' on page 138).
•
The parameter 'Fax Transport Mode' (Fax / Modem / CID Settings
screen) is overridden by the parameter IsFaxUsed.

Configuring the Voice Settings

The 'Voice Settings' screen is used for configuring various voice parameters such as voice
volume.
To configure the Voice Settings parameters, take these 4 steps:
Open the 'Voice Settings' screen (Advanced Configuration menu > Media Settings
1.
> Voice Settings option).
176
MediaPack Series
Document #: LTRT-65409