General Parameters; Figure 5-20: Routing Tables - General Parameters Screen; Table 5-20: General Parameters (Routing Tables) - AudioCodes MP-124 User Manual

SIP User's Manual
5.5.4.1
Parameter
Add Trunk Group ID as
Prefix
[AddTrunkGroupAsPref
ix]
Version 5.2
http://ArtTel.ru

General Parameters

The General Parameters option is used to configure the gateway's IP-to-Tel and Tel-to-IP
routing parameters.
To configure the general routing parameters, take these 4 steps:
Open the 'General Parameters' screen (Protocol Management menu > Routing
1.
Tables submenu > General Parameters option).

Figure 5-20: Routing Tables - General Parameters Screen

Configure the general parameters according to the table below.
2.
Click the Submit button to save your changes.
3.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
4.

Table 5-20: General Parameters (Routing Tables)

[0] No = Don't add hunt group ID as prefix (default).
[1] Yes = Add hunt group ID as prefix to called number.
If enabled, then the gateway's hunt group ID is added as a prefix to the
destination phone number for Tel-to-IP calls.
Notes:
This option can be used to define various routing rules.
To use this feature, you must configure the hunt group IDs.
Description
127
5. Web-based Management
September 2007