Customizing The Product Name; Table 5-5: Customizable Logo Ini File Parameters; Table 5-6: Web Appearance Customizable Ini File Parameters - AudioCodes MP-124 User Manual

SIP User's Manual
Parameter
BkgImageFileName
5.4.5.3
Parameter
UseProductName
UserProductName
Version 5.2
http://ArtTel.ru
To replace the background image via the ini file, take these 3
steps:
Place your background image file in the same folder as where the device's ini file is
1.
located (i.e., the same location defined in the BootP/TFTP configuration utility). For
detailed information on the BootP/TFTP, refer to the SIP Series Reference Manual).
Add or modify the ini file parameters listed in the table below (according to the
2.
procedure described in 'Modifying an ini File' on page 251).
Load the ini file using only BootP / TFTP (i.e., not through the Embedded Web
3.
Server).

Table 5-5: Customizable Logo ini File Parameters

The name (and path) of the file containing the new background.
Use a gif, jpg or jpeg image file.
The default is AudioCodes background file.
Note: The length of the name of the image file is limited to 47 characters.

Customizing the Product Name

To replace AudioCodes' default product name with a text string, add or modify the two ini
file parameters listed in the table below (according to the procedure described in' Modifying
an ini File' on page 251).

Table 5-6: Web Appearance Customizable ini File Parameters

[0] = Don't change the product name (default).
[1] = Enable product name change.
Text string that replaces the product name.
The default is 'MediaPack'.
The string can be up to 29 characters.
5. Web-based Management
Description
Description
67 September 2007