Figure 5-41: Ip Routing Tablre Screen; Table 5-32: Ip Routing Table Column Description - AudioCodes MP-124 User Manual

SIP User's Manual
Column Name
[ini File Parameter Name]
Delete Row
Destination IP Address
[RoutingTableDestinationsCol
umn]
Destination Mask
[RoutingTableDestinationMas
ksColumn]
The address of the host / network you want to reach is determined by an AND operation that is
applied on the fields 'Destination IP Address' and 'Destination Mask'.
For example:
To reach the network 10.8.x.x, enter 10.8.0.0 in the field 'Destination IP Address' and 255.255.0.0 in
the field 'Destination Mask'. As a result of the AND operation, the value of the last two octets in the
field 'Destination IP Address' is ignored.
To reach a specific host, enter its IP address in the field 'Destination IP Address' and
255.255.255.255 in the field 'Destination Mask'.
Version 5.2
http://ArtTel.ru
To configure the IP Routing table, take these 3 steps:
Open the 'IP Routing Table' screen (Advanced Configuration menu > Network
1.
Settings > Routing Table option).

Figure 5-41: IP Routing Tablre Screen

Use the 'Add a new table entry' pane to add a new routing rule. Each field in the IP
2.
routing table is described in the table below.
Click the button Add New Entry; the new routing rule is added to the IP routing table.
3.

Table 5-32: IP Routing Table Column Description

To delete IP routing rules from the IP Routing Table, check the
Delete Row check box in the rows of the routing rules you want to
delete and click the button Delete Selected Entries; the routing
rules are removed from the table.
Specifies the IP address of the destination host / network.
Specifies the subnet mask of the destination host / network.
Description
173
5. Web-based Management
September 2007