SIP User's Manual
Read Only Community String
[SNMPReadOnlyCommunityString_x]
Read / Write Community String
[SNMPReadWriteCommunityString_x]
Trap Community String
[SNMPTrapCommunityString]
Version 5.2
http://ArtTel.ru
Figure 5-56: SNMP Community Strings Screen
Configure the SNMP Community Strings parameters according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
5.
To delete a community string, select the Delete checkbox to the left of the
Note:
community string you want to delete, and then click the button Submit.
Table 5-47: SNMP Community Strings Parameters
Parameter
Description
Up to five read-only community strings (up to 19 characters
each).
The default string is 'public'.
Up to five read / write community strings (up to 19
characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
213
5. Web-based Management
September 2007