Working With Supplementary Services; Figure 7-8: Tel To Ip Routing Screen - AudioCodes MP-124 User Manual

7.13
SIP User's Manual
http://ArtTel.ru
In the 'Tel to IP Routing' screen, enter 10 in the 'Destination Phone Prefix' field, and
3.
the IP address of the FXS gateway (10.1.10.3) in the field 'IP Address'.

Figure 7-8: Tel to IP Routing Screen

In the 'Protocol Management' screen, set the parameter 'Dialing Mode' to 'Two Stage'
4.
(IsTwoStageDial = 1).

Working with Supplementary Services

The gateway supports the following supplementary services:
Call Hold and Retrieve; refer to 'Call Hold and Retrieve' on page
Consultation / Alternate; refer to 'Consultation / Alternate' on page
Call Transfer; refer to 'Call Transfer' on page
Call Forward (3xx Redirect Responses); refer to 'Call Forward' on page
Call Waiting (182 Queued Response); refer to 'Call Waiting' on page
Message Waiting Indication (MWI); refer to 'Message Waiting Indication' on page
Caller ID (refer to 'Caller ID' on page 361)
To activate these supplementary services (Hold, Transfer, Forward, Waiting and MWI) on
the gateway, enable each service's corresponding parameter either from the Embedded
Web Server or via the ini file.
358
356
MediaPack Series
357
357
358
359
360
Document #: LTRT-65409