AudioCodes MP-124 User Manual page 200

Parameter
SRTP Settings
Enable Media Security
[EnableMediaSecurity]
Media Security Behavior
[MediaSecurityBehaviour]
IPSec Settings
Enable IP Security
[EnableIPSec]
SIP User's Manual
http://ArtTel.ru
Table 5-40: General Security Settings Parameters
Enables or disables the Secure Real-Time Transport Protocol
(SRTP).
[0] Disable = SRTP is disabled (default).
[1] Enable = SRTP is enabled.
Determines the gateway's mode of operation when SRTP is used
(EnableMediaSecurity = 1).
[0] Preferable = The gateway initiates encrypted calls. If
negotiation of the cipher suite fails, an unencrypted call is
established. Incoming calls that don't include encryption
information are accepted.
[1] Mandatory = The gateway initiates encrypted calls. If
negotiation of the cipher suite fails, the call is terminated. Incoming
calls that don't include encryption information are rejected
(default).
Enables / disables the Secure Internet Protocol (IPSec) on the
gateway.
[0] Disable = IPSec is disabled (default).
[1] Enable = IPSec is enabled.
200
MediaPack Series
Description
Document #: LTRT-65409