Configuring The Snmp Trap Destinations Table; Figure 5-55: Snmp Trap Destinations Screen - AudioCodes MP-124 User Manual

SIP User's Manual
5.9.1
Version 5.2
http://ArtTel.ru

Configuring the SNMP Trap Destinations Table

The 'SNMP Trap Destinations' screen allows you to configure the attributes of up to five
SNMP managers.
To configure the SNMP Trap Destination table, take these 5 steps:
Access the 'Management Settings' screen (Advanced Configuration menu >
1.
Management Settings); the 'Management Settings' screen is displayed (refer to
'Configuring the Management Settings' on page 208).
Open the 'SNMP Trap Destination' screen by clicking the arrow sign (-->) to the right
2.
of the SNMP Trap Destinations label.

Figure 5-55: SNMP Trap Destinations Screen

Configure the SNMP Trap parameters according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
5.
If you clear a check box and then click Submit, all settings in the same row
Note:
revert to their defaults.
211
5. Web-based Management
September 2007