Figure 5-35: Radius Parameters Screen; Table 5-26: Radius Parameters - AudioCodes MP-124 User Manual

SIP User's Manual
Parameter
Enable RADIUS
EnableRADIUS
RADIUS Accounting Server
IP Address
[RADIUSAccServerIP]
RADIUS Accounting Port
[RADIUSAccPort]
RADIUS Accounting Type
[RADIUSAccountingType]
AAA Indications
[AAAIndications]
Version 5.2
http://ArtTel.ru
To configure the RADIUS parameters, take these 4 steps:
Open the 'RADIUS Parameters' screen (Protocol Management menu > Advanced
1.
Applications submenu > RADIUS Parameters).

Figure 5-35: RADIUS Parameters Screen

Configure the RADIUS accounting parameters according to the table below.
2.
Click the Submit button to save your changes.
3.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
4.

Table 5-26: RADIUS Parameters

Enables or disables the RADIUS application.
Valid options include:
[0] Disables = disables RADIUS application (default)
[1] Enable = enables RADIUS application
IP address of the RADIUS accounting server.
Port of the RADIUS accounting server.
The default value is 1646.
Determines when the RADIUS accounting messages are sent to the
RADIUS accounting server.
Valid options include:
[0] At Call Release = Sent at the release of the call only (default).
[1] At Connect and Release = Sent at the connect and release of the
call.
[2] At Setup and Release = Sent at the setup and release of the call.
Determines which Authentication, Authorization and Accounting (AAA)
indications to use.
Valid options include:
[0] None = No indications (default).
[3] Accounting Only = Only accounting indications are used.
Description
155
5. Web-based Management
September 2007