Pstn Parameters; Table 6-9: Pstn Parameters - AudioCodes MP-124 User Manual

SIP User's Manual
ini File Field Name
Web Parameter Name
DigitPatternInternalCall For a description of this parameter, refer to 'Configuring the Voice Mail
DigitPatternExternalCal
l
TelDisconnectCode
6.5.9
ini File Field Name
Web Parameter Name
PlayRBTone2Tel
PlayRBTone2IP
ProgressIndicator2IP
SendMetering2IP
TimeForReorderTone
DisconnectOnBusyTone For a description of this parameter, refer to 'Configuring the FXO
EnableVoiceDetection
DigitMapping
Version 5.2
http://ArtTel.ru
Table 6-8: Voice Mail Configuration Parameters
(VM) Parameters' on page 160.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 160.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 160.

PSTN Parameters

Table 6-9: PSTN Parameters

For a description of this parameter, refer to 'General Parameters' on
page 70.
For a description of this parameter, refer to 'General Parameters' on
page 70.
For a description of this parameter, refer to 'General Parameters' on
page 100.
This parameter is now obsolete.
For a description of this parameter, refer to 'Configuring the FXO
Parameters' on page 156.
Parameters' on page
For a description of this parameter, refer to 'Configuring the FXO
Parameters' on page 156.
[1] = The gatewaysends 200 OK (to INVITE) messages when
speech/fax/modem is detected.
[0] = The gateway sends 200 OK messages immediately after the
gateway finishes dialing (default).
Usually this feature is used only when early media is used to establish
voice path before the call is answered.
Notes:
To activate this feature, set EnableDSPIPMDetectors to 1.
This feature is applicable only when the protocol type is CAS.
For a description of this parameter, refer to 'DTMF & Dialing Parameters'
on page 95.
Valid Range and Description
Valid Range and Description
156
293
6. ini File Configuration
September 2007