Radius Configuration Parameters - Proxim ORiNOCO AP-2500 User Manual

Network Parameters

RADIUS Configuration Parameters

You can configure the AP to communicate with up to four different RADIUS servers:
• Primary Authentication Server
• Back-up Authentication Server
• Primary Accounting Server
• Back-up Accounting Server
NOTE
You must configure the settings for at least one Authentication server before configuring the settings for an
Accounting server.
The back-up servers are optional, but when configured, the AP will communicate with the back-up server if the primary
server is off-line. You can configure the same server to perform both Authentication and Accounting services.
You can configure the following parameters from the AP's Configure > Network > Security > RADIUS screen. If you
are using RADIUS with Internal Authentication, see
step-by-step configuration instructions.
Figure 4-16 RADIUS Configuration Screen
RADIUS Servers
• Enable Servers: Place a check mark in the appropriate box to enable the AP's RADIUS client for Authentication
and/or Accounting.
NOTE
The Server settings below apply to both the Primary RADIUS server and the optional Secondary RADIUS
server.
Internal Authentication with RADIUS for additional information and
96