Services; Http/Https - Proxim Edge MP-1035-CPE Device Management Manual

4. Select the file type from the drop-down that you want to retrieve from the device. The file types may vary depending
on your device. The File Types are; Config, Event Log, Debug Log, Config Profile, License Info.
The Config Profile is used for replicating the configuration of a master device on to other similar devices by excluding
the unique parameters like System information, IP configuration, Ethernet configuration, Wireless configuration based
on the selection. By default, System Information and IP Configuration parameters are excluded.
After excluding the unique parameters, click Create Profile and then Retrieve. When you load the retrieved
configuration profile file on target devices, the target devices will come up with the configuration of the master device
except the excluded parameters. The excluded parameters are retained as configured on the target device.
5. Click Retrieve. You can find the retrieved file in the TFTP Server folder.
:
•
Config Profile is applicable only to the compatible devices.
•
When the device is running with default factory settings, Binary Configuration file is not available and cannot
be retrieved.
•
You can retrieve Event Logs only when they are generated by the device.

5.3 Services

The Services feature allows you to configure the management interface (HTTP/HTTPS, Telnet/SSH, SNMP, and Logs)
parameters that prevent unauthorized access to the device.

5.3.1 HTTP/HTTPS

Navigate to Management > Services > HTTP/HTTPS and configure the following parameters:
•
Admin Password or Monitor Password: By default, the password is set to public.
: Special characters like - = \ " ' ? / space are not allowed in the password.
•
HTTP: When enabled, it allows the user to access the device through web interface. To prevent access to the device
through web interface, select Disable.
•
HTTP Port: It represents the HTTP port to manage the device through Web Interface. Preferred value is 80.
•
HTTPS: When enabled, it allows the user to access the device through a web interface over secure socket Layer
(HTTPS). To prevent access to the device through HTTPS, select Disable. The password configuration for HTTPS is same
as configured for HTTP.
•
LANGUAGE: It allows the user to select the following languages from the drop down as shown in the figure below:
• English
• Spanish
• French
Select the desired language from the drop down and click OK, Commit and then Reboot.
: Multi-Language support is added for Admin User based on the following SKUs:
• US SKU – English only
• WD SKU – User can opt between English, French and Spanish for UI
• CN SKU – Chinese only.
• JP SKU – Japanese only.
The SKUs that are converted for WD using console commands will have the same options as WD SKU.
Device Management Guide
Device Management
32