D-Link xStack DGS-3420 Series Reference Manual page 268

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MAC-based Access
Control State
Method
RADIUS
Authorization
Local Authorization
Log State
Password Type
Password
Trap State
Figure 8-34 MAC-based Access Control Settings window
Description
Toggle to globally enable or disable the MAC-based access control function on the
Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured
in the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control. Remember, the MAC list must be previously set on the
RADIUS server.
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
Use the drop-down menu to enable or disable log state.
Use the drop-down menu to select the password type. Available options are Manual
String and Client MAC Address.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Use the drop-down menu to enable or disable sending out the trap for MAC-based
Access Control.
258