Session Table; Single Ip Management - D-Link xStack DGS-3420 Series Reference Manual

Xstack dgs-3420 series layer 2 managed stackable gigabit switch web ui reference guide
Hide thumbs Also See for xStack DGS-3420 Series:
Table of Contents

Advertisement

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
IP Address
Subnet Mask
Gateway
Status
Click the Apply button to accept the changes made.

Session Table

Users can display the management sessions since the Switch was last rebooted.
To view the following window, click Management > Session Table, as show below:
Click the Refresh button to refresh the display table so that new entries will appear.

Single IP Management

Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet instead of
using stacking ports or modules. There are some advantages in implementing the "Single IP Management" feature:
1. SIM can simplify management of small workgroups or wiring closets while scaling the network to handle
increased bandwidth demand.
2. SIM can reduce the number of IP address needed in your network.
3. SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers that
typically limit your topology options when using other stacking technology.
Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules:
SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line
Interface or Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's
network.
There are three classifications for switches using SIM. The Commander Switch (CS), which is the master
switch of the group, Member Switch (MS), which is a switch that is recognized by the CS a member of a
Figure 3-17 Out of Band management Settings window
Description
Enter the IP address of the interface.
Enter the subnet mask of the IP address.
Enter the gateway IP address of the out-of-band management network.
Use the drop-down menu to enable or disable the interface status.
Figure 3-18 Session Table window
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3420-28sc

Table of Contents