D-Link xStack DGS-3420 Series Reference Manual page 47

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
Click the Apply button to accept the changes made for each individual section.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv6 Edit button to see the following window.
The fields that can be configured or displayed are described below:
Parameter
Interface Name
IPv6 State
Interface Admin State
IPv6 Network Address
DHCPv6 Client
NS Retransmit Time
(0-4294967295)
Automatic Link Local
Address
State
Life Time (0-9000)
Reachable Time (0-
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Figure 3-11 IPv6 Interface Settings window
Description
Display the IPv6 interface name.
Use the drop-down menu to enable or disable IPv6 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Enter the interface's global or link local address.
Use the drop-down menu to enable or disable DHCPv6 client.
Enter the Neighbor solicitation's retransmit timer in millisecond here. It has the same
value as the RA retransmit time in the config ipv6 nd ra command. If this field is
configured, it will duplicate the entry into the RA field.
Use the drop-down menu to enable or disable the Automatic Link Local Address.
Use the drop-down menu to enable or disable router advertisement.
Enter the lifetime of the router between 0 and 9000 seconds as the default router.
Enter the amount of time that a node can consider a neighboring node reachable
37