Igmp Multicast Group Profile Settings - D-Link xStack DGS-3420 Series Reference Manual

Xstack dgs-3420 series layer 2 managed stackable gigabit switch web ui reference guide
Hide thumbs Also See for xStack DGS-3420 Series:
Table of Contents

Advertisement

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
2. Member ports and source ports can be used in multiple Multicast VLANs. But member ports and source
ports cannot be the same port in a specific Multicast VLAN.
3. The Multicast VLAN is exclusive with normal 802.1q VLANs, which means that VLAN IDs (VIDs) and VLAN
Names of 802.1q VLANs and Multicast VLANs cannot be the same. Once a VID or VLAN Name is chosen
for any VLAN, it cannot be used for any other VLAN.
4. The normal display of configured VLANs will not display configured Multicast VLANs.
5. Once a Multicast VLAN is enabled, the corresponding IGMP snooping state or MLD snooping state of this
VLAN will also be enabled. Users cannot disable the IGMP snooping and MLD snooping feature for an
enabled Multicast VLAN.
6. One IP multicast address cannot be added to multiple Multicast VLANs, yet multiple Ranges can be added
to one Multicast VLAN.

IGMP Multicast Group Profile Settings

Users can add a profile to which multicast address reports are to be received on specified ports on the Switch. This
function will therefore limit the number of reports received and the number of multicast groups configured on the
Switch. The user may set an IP Multicast address or range of IP Multicast addresses to accept reports (Permit) or
deny reports (Deny) coming into the specified switch ports.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Multicast
Group Profile Settings, as show below:
The fields that can be configured are described below:
Parameter
Profile Name
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the Delete button to remove the corresponding entry.
Click the
Group List
link to configure the Multicast Group Profile Address Settings for the specific entry.
After clicking the
Group List
Figure 4-77 IGMP Multicast Group Profile Settings window
Description
Enter a name for the IP Multicast Profile.
link, the following page will appear:
Figure 4-78 Multicast Group Profile Multicast Address Settings window
124

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3420-28sc

Table of Contents