D-Link xStack DGS-3420 Series Reference Manual page 378

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Mirror Global State
Group ID (1-4)
Click the Apply button to accept the changes made for each individual section.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Modify button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Modify button to see the following window.
The fields that can be configured are described below:
Parameter
Target Port
Source Ports
State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Figure 11-16 Port Mirror Settings window
Description
Click the radio buttons to enable or disable the Port Mirroring feature.
Enter a mirror group ID.
Figure 11-17 Port Mirror Settings - Modify window
Description
Here the user can select the Target Port used for Port Mirroring.
If the ports are not specified by option, the source of RSPAN will come from the
source specified by the mirror command or the flow-based source specified by an
ACL. If no parameter is specified for source, it deletes the configured source
parameters.
Select RX, TX or Both to specify in which direction the packets will be monitored.
Tick Add or Delete to add or delete source ports.
Specify the output port list for the RSPAN VLAN packets. If the redirect port is a Link
Aggregation port, the Link Aggregation behavior will apply to the RSPAN packets.
Tick Add or Delete to add or delete redirect ports.
368