Lldp - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Sub-Ring R-APS VLAN
(1-4094)
State
TC Propagation State
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.

LLDP

LLDP
LLDP Global Settings
On this page the user can configure the LLDP global parameters.
To view the following window, click L2 Features > LLDP > LLDP> LLDP Global Settings, as show below:
The fields that can be configured are described below:
Parameter
LLDP State
LLDP Forward
Message
Message TX Interval
(5-32768)
Message TX Hold
Description
Enter the Sub-Ring R-APS VLAN ID used here.
Tick the check box and use the drop-down menu to add or delete the ERPS Sub-
Ring state.
Tick the check box and use the drop-down menu to enable or disable the TC
Propagation state.
Figure 4-101 LLDP Global Settings window
Description
Click the radio buttons to enable or disable the LLDP feature.
When LLDP is disabled this function controls the LLDP packet forwarding message
based on individual ports. If LLDP is enabled on a port it will flood the LLDP packet to
all ports that have the same port VLAN and will advertise to other stations attached to
the same IEEE 802 LAN.
This interval controls how often active ports retransmit advertisements to their
neighbors. To change the packet transmission interval, enter a value between 5 and
35768 seconds.
This function calculates the Time-to-Live for creating and transmitting the LLDP
142