Upload Log To Http; Reset - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Log Type
Click Upload to initiate the upload.

Upload Log to HTTP

This window allows the user to upload the log file from the Switch to a computer.
The fields that can be configured are described below:
Parameter
Log Type
Click Upload to initiate the upload.

Reset

The Reset function has several options when resetting the Switch. Some of the current configuration parameters
can be retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the Switch's non-
volatile RAM, and then restart the Switch. All other options enter the factory defaults into the
current configuration, but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other
configuration parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
The fields that can be configured are described below:
Parameter
Reset
Reset Config
Reset System
Click the Apply button to initiate the Reset action.
Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Figure 12-19 Upload Log to HTTP window
Description
Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Figure 12-20 Reset System window
Description
Selecting this option will factory reset the Switch but not the IP Address, User
Accounts and the Banner.
Selecting this option will factory reset the Switch but not perform a Reboot.
Selecting this option will factory reset the Switch and perform a Reboot.
388