Adding A Cpu Ipv6 Acl Profile - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Show All Rules button to navigate back to the CPU Access Rule List.

Adding a CPU IPv6 ACL Profile

The window shown below is the Add CPU ACL Profile window for IPv6. To use specific filtering masks in this ACL
profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add CPU ACL Profile button, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-5)
Select ACL Type
Figure 7-33 CPU Access Rule Detail Information (IPv4 ACL)
Figure 7-34 Add CPU ACL Profile (IPv6 ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1
to5.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or
packet content mask. This will change the menu according to the requirements for
the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
Select IPv4 to instruct the Switch to examine the IP address in each frame's
header.
210