Acl Finder; Acl Flow Meter - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
After clicking the Show Details button in the CPU Access Rule List, the following page will appear:
Click the Show All Rules button to navigate back to the CPU Access Rule List.

ACL Finder

The ACL rule finder helps you to identify any rules that have been assigned to a specific port and edit existing rules
quickly.
To view this window, click ACL > ACL Finder as shown below:
The fields that can be configured are described below:
Parameter
Profile ID
Unit
Port
State
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry selected.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

ACL Flow Meter

Before configuring the ACL Flow Meter, here is a list of acronyms and terms users will need to know.
Figure 7-43 CPU Access Rule Detail Information (Packet Content ACL)
Figure 7-44 ACL Finder window
Description
Use the drop-down menu to select the Profile ID for the ACL rule finder to identify the
rule.
Select the unit you wish to configure.
Enter the port number for the ACL rule finder to identify the rule.
Use the drop-down menu to select the state.
Normal - Allow the user to find normal ACL rules.
CPU - Allow the user to find CPU ACL rules.
Egress – Allow the user to find Egress ACL rules.
216