xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Static
Default
RIP
Click the Apply button to accept the changes made.
Route Redistribution Settings
This window is used to redistribute the routing information from other routing protocols to RIP.
To view the following window, click L3 Features > Route Redistribution Settings, as shown below:
The fields that can be configured are described below:
Parameter
Destination Protocol
Source Protocol
Metric (0-16)
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
IP Tunnel
IP Tunnel Settings
This window is used to configure IP Tunnel Settings.
To view the following window, click L3 Features > IP Tunnel > IP Tunnel Settings, as shown below:
The fields that can be configured are described below:
Enter the Static route type preference value here.
Enter the Default route type preference value here.
Enter the RIP route type preference value here.
Figure 5-7 Route Redistribution Settings
Description
Use the drop-down menu to select the destination protocol.
Use the drop-down menu to select the source protocol.
Enter the RIP metric value for the redistributed routes.
Figure 5-8 IP Tunnel Settings window
163