Ip Forwarding Table; Route Preference Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
IPv6 Address/Prefix
Length
IPv6 Address
RIPng
Hardware
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IP Forwarding Table

The IP forwarding table stores all the direct connected IP information. On this page the user can view all the direct
connected IP information.
To view the following window, click L3 Features > IP Forwarding Table, as show below:
Click the IP Address, Interface Name or Port radio button, enter the information and click the Find button to
locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Route Preference Settings

This window is used to configure the route type preference. The route with smaller preference has higher priority.
The preference for local routes is fixed to 0.
To view the following window, click L3 Features > Route Preference Settings, as shown below:
The fields that can be configured are described below:
Parameter
Tick the check box and enter the IPv6 destination network address of the route.
Tick the check box and enter the IPv6 address.
Tick the check box to display the RIPng route entries.
Tick the check box to display the route entries which have been written into
hardware table.
Figure 5-5 IP Forwarding Table
Figure 5-6 Route Preference Settings window
Description
162