D-Link xStack DGS-3420 Series Reference Manual page 38

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Stacking Mode
Force Master
Role
Stacking Trap
State
Stacking Log
State
Current Box ID
New Box ID
Priority (1-63)
Click the Apply button to accept the changes made.
The stacking mode is disabled by default.
Use the radio buttons to enable or disable the function. It is used to ensure the master role
is unchanged when adding a new device to the current stacking topology. If the Enabled
radio button is selected, the master's priority will become zero after the stacking has
stabilized.
Specifies that the traps will be sent for stacking.
Specifies that the logs will be sent for stacking.
The Box ID of the switch in the stack to be configured.
The new box ID of the selected switch in the stack that was selected in the Current Box ID
field. The user may choose any number between 1 and 12 to identify the switch in the
switch stack. Auto will automatically assign a box number to the switch in the switch stack.
Displays the priority ID of the Switch. The lower the number, the higher the priority. The
box (switch) with the lowest priority number in the stack is the Primary Master switch. The
Primary Master switch will be used to configure applications of the switch stack.
28