System Log Server Settings; System Log - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Switch will save the log files, in the box adjacent to this configuration field. The user may set
a time between 1 and 65535 minutes.
Log Trigger – Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
Click the Apply button to implement changes made.

System Log Server Settings

The Switch can send System log messages to up to four designated servers using the System Log Server.
To view the following window, click System Configuration > System Log Configuration > System Log Server
Settings, as show below:
The fields that can be configured are described below:
Parameter
Server ID
Severity
Server IPv4 Address
Server IPv6 Address
Facility
UDP Port
(514 or 6000-65535)
Status
Click the Apply button to accept the changes made.
Click the Delete All button to remove all servers configured.

System Log

Users can view and delete the local history log as compiled by the Switch's management agent.
To view the following window, click System Configuration > System Log Configuration > System Log, as show
below:
Figure 2-13 System Log Server Settings
Description
System log server settings index (1 to 4).
Use the drop-down menu to select the higher level of messages that will be sent. All
messages which level is higher than selecting level will be sent. The options are
Emergency(0), Alert(1), Critical(2), Error(3), Warning(4), Notice(5), Informational(6) and
Debug(7).
The IPv4 address of the System log server.
The IPv6 address of the System log server.
Use the drop-down menu to select Local 0, Local 1, Local 2, Local 3, Local 4, Local 5,
Local 6, or Local 7.
Type the UDP port number used for sending System log messages. The default is 514.
Choose Enabled or Disabled to activate or deactivate.
19