Multicast Static Fdb Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN Name
VLAN List
MAC Address
Port/Drop
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Multicast Static FDB Settings

Users can set up static multicast forwarding on the Switch.
To view the following window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings,
as show below:
The fields that can be configured are described below:
Parameter
VID
Figure 4-40 Unicast Static FDB Settings window
Description
Click the radio button and enter the VLAN name of the VLAN on which the associated
unicast MAC address resides.
Click the radio button and enter a list of VLAN on which the associated unicast MAC
address resides.
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Allows the selection of the port number on which the MAC address entered above resides
This option could also drop the MAC address from the unicast static FDB. When selecting
Port, enter the port number in the field. The format can be "unit ID:port number" (e.g. 1:5)
or "port number" (e.g. 5). When only entering port number, the default unit ID is 1.
Figure 4-41 Multicast Static FDB Settings window
Description
The VLAN ID of the VLAN the corresponding MAC address belongs to.
99