Chapter 10 Oam; Cfm; Cfm Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Chapter 10

CFM

Ethernet OAM
DULD Settings
Cable Diagnostics
CFM

CFM Settings

On this page the user can configure the CFM parameters.
To view this window, click OAM > CFM > CFM Settings, as shown below:
The fields that can be configured are described below:
Parameter
CFM State
All MPs Reply LTRs
MD
MD Index
Level
MIP
SenderID TLV
OAM
Figure 10-1 CFM Settings Window
Description
Click the radio buttons to enable or disable the CFM feature.
Click the radio buttons to enable or disable all MPs to reply LTRs.
Enter the maintenance domain name.
Enter the maintenance domain index used.
Use the drop-down menu to select the maintenance domain level.
This is the control creations of MIPs.
None – Don't create MIPs. This is the default value.
Auto – MIPs can always be created on any ports in this MD, if that port is not
configured with an MEP of this MD. For the intermediate switch in an MA, the setting
must be auto in order for the MIPs to be created on this device.
Explicit – MIPs can be created on any ports in this MD, only if the next existent lower
level has an MEP configured on that port, and that port is not configured with an MEP
of this MD.
This is the control transmission of the SenderID TLV.
336